TI’s ADS124S08 analog to digital converter is a 24-bit, 4 kSPS, 12-channel ΔΣ ADC with PGA and VREF for precision sensor measurement.
By Texas Instruments 904
Texas Instruments' LPV811 single-channel 450 nA precision nanopower operational amplifier designed for "always on" sensing applications in battery powered wireless and low power requ
By Texas Instruments 648
Texas Instruments' TLV8801 family of ultra-low-power operational amplifiers are ideal for cost-optimized sensing applications in wireless and low power wired equipment.
By Texas Instruments 699
TI's ADS8920B, ADS8922B, and ADS8924B (ADS892xB) belong to a family of pin-to-pin compatible, high-speed, high-precision successive approximation register (SAR) based ADCs.
By Texas Instruments 713
TI’s ADS124S06 analog to digital converter is a 24-bit, 4 kSPS, 6-channel ΔΣ ADC with PGA and VREF for precision sensor measurement.
By Texas Instruments 866
Texas Instruments' LMX2491 device is a low-noise, 6.4 GHz, wideband, delta-sigma fractional-N PLL with ramp and chirp generation.
By Texas Instruments 687
Texas Instruments’ TLV8812 family of precision ultra-low-power operational amplifiers is ideal for cost-optimized systems.
By Texas Instruments 770
Texas Instruments' REF6025/6125 voltage references are ideal for applications including ATE testers, oscilloscopes, and medical equipment.
By Texas Instruments 644
Texas Instruments' ISO773x devices have an ON-OFF keying (OOK) modulation scheme to transmit the digital data across a silicon dioxide based isolation barrier.
By Texas Instruments 946
Texas Instruments' LPV812 series of nanoPower CMOS operational amplifiers are designed for long-life, battery-powered, and energy harvested applications.
By Texas Instruments 896
Texas Instruments' TLVx369 family of operational amplifiers minimizes power consumption and operates on supply voltages as low as 1.8 V.
By Texas Instruments 1062
Texas Instruments' TLV354x is a CMOS, rail-to-rail I/O, high-speed, voltage-feedback operational amplifier designed for video, high-speed, and other applications.
By Texas Instruments 819
Texas Instruments' LM5166 regulator is an easy-to-use synchronous buck DC/DC converter that operates from a 3 V to 65 V supply voltage.
By Texas Instruments 853
Texas Instruments' DRV8701 is a single H-bridge gate driver that uses four external N-channel MOSFETs targeted to drive a 12 V to 24 V bidirectional brushed DC motor.
By Texas Instruments 882
Texas Instruments' ADS8588S is a 16-bit data acquisition (DAQ) system with 8-channel analog inputs which can operate from a single 5 V analog supply.
By Texas Instruments 932
Texas Instruments' OPA388 precision op-amp provides rail-to-rail input output operation in a low-noise, zero-drift, zero-crossover device.
By Texas Instruments 1042
Texas Instruments' ISO7840 device is a high-performance, quad-channel digital isolator with a 5.7 kVRMS isolation voltage and enable pins on each side.
By Texas Instruments 2118
Texas Instruments' TLVx170 family of op amps provide high overall performance, making the devices ideal for many general purpose applications.
By Texas Instruments 751
Texas Instruments' LPV801 and LPV802 series nanoPower CMOS operational amplifiers are designed for long-life battery-powered and energy harvested applications.
By Texas Instruments 740
Texas Instruments' ADC080x series are versatile 8-bit μP compatible general purpose ADC converters operate on single 5 V supply.
By Texas Instruments 1168