Texas Instruments' LMH5401 is a very high-performance, differential amplifier optimized for RF, IF, or high-speed, DC-coupled, time-domain applications.
By Texas Instruments 74
Texas Instruments' OPA2316 1.8V CMOS Op Amp features rail-to-rail input & output swings, low quiescent current combined with wide bandwidth and very-low noise.
By Texas Instruments 437
ON Semiconductor's NCS333 high-precision, low-quiescent current amplifiers have high-impedance inputs with a common-mode range 100 mV beyond the rails.
By ON Semiconductor 119
Texas Instruments' OPA2172 series are low-noise operational amplifiers that offer wide bandwidth, fast slew rate, and high output current drive capability.
By Texas Instruments 166
Analog Devices has introduced the industry’s most robust operational amplifier that integrates input protection against signal excursions of 32 V beyond the supply rails and 70-dB of rejection for
By Analog Devices Inc 110
Diodes Incorporated offer the PAM8009 3 W Class-D audio power amplifier for driving bridged-tied (BTL) stereo speakers.
By Diodes Incorporated 67
Maxim's MAX44284 is a high-side, current-sense amplifier that operates with a 1.7 V to 5.5 V single supply and is optimized for very low power operation.
By Maxim Integrated 186
The Texas Instruments' THS4042 is a dual, high-speed voltage feedback amplifier capable of driving any capacitive load for a wide range of applications.
By Texas Instruments 194
TLC1078 op amps offer improved performance over TI's previous series, making it an easy way to upgrade existing designs.
By Texas Instruments 68
The NCS2003 family of op amps features high slew rate, low voltage operation with rail−to−rail output drive capability.
By ON Semiconductor 301
Diodes’ PAM8905 is a 1.9 W Class-D audio amplifier with integrated boost converter delivers high SPL and has extended battery life with battery tracking AGC.
By Diodes Incorporated 64
ADI's ADA4807 operates over a wide range of supply voltage and reduces typical quiescent supply current when asserted
By Analog Devices Inc 58
Monolithic Power Systems MP7752 is an analog input inductorless class-D audio amplifier, which drives stereo speakers in bridge-tied-load configuration.
By Monolithic Power Systems 60
Texas Instruments' 36 V low-/high-side bi-directional zero-drift current sense amp with precision internal shunt resistor.
By Texas Instruments 124
Texas Instruments' OPAx192 family is a new generation of 36 V, e-trim operational amplifiers.
By Texas Instruments 60
Texas Instruments' TPA3140D2 is an inductor-free stereo (BTL), 10 W, Class-D audio amplifier with ultra-low EMI and auto gain limiter.
By Texas Instruments 77
Wolfspeed’s CMPA1D1E025F is a gallium nitride (GaN) high electron mobility transistor (HEMT) based monolithic microwave integrated circuit (MMIC).
By Wolfspeed 81
ISSI’s IS31AP2111 and IS31AP2121 high-performance digital and analog input Class-D power amplifiers targeting consumer and professional audio applications.
By ISSI, Integrated Silicon Solution Inc. 64
Texas Instruments' TPA3144D2 is an efficient, Class-D audio power amplifier for driving bridged-tied stereo speakers at up to 6 W, 6 Ω, or 8 Ω (per channel).
By Texas Instruments 105
Maxim’s MAX98371 is a high-efficiency, mono Class D audio amplifier featuring dynamic headroom tracking (DHT).
By Maxim Integrated 155