InvenSense's 7-axis ICM-20789 is an integrated 6-axis inertial device that combines a 3-axis gyroscope, 3-axis accelerometer, and an ultra-low noise MEMS capacitive pressure sensor in a 4 mm x 4 mm x 1.365 mm LGA package. This unique 7-axis device offers performance of discrete components in a single small footprint for tracking rotational and linear motion as well as pressure differences with an accuracy of ±1 Pa, an accuracy enabling altitude measurement differentials as small as 8.5 cm.
Features |
- Pressure operating range: 30 to 110 kPa
- Noise and current consumption
- 3.2 Pa @ 1.3 µA (LP mode)
- 0.8 Pa @ 5.2 µA (LN mode)
- 0.4 Pa @ 10.4 µA (ULN mode)
- Pressure sensor relative accuracy: ±1 Pa for any 10 hPa change over 950 hPa to 1050 hPa at 25°C
- Pressure sensor absolute accuracy: ±1 hPa over 950 hPa to 1050 hPa, 0°C to 65°C
- Pressure sensor temperature coefficient offset: ±0.5 Pa/°C over 25°C to 45°C at 100 kPa
- Gyroscope programmable FSR of ±250 dps, ±500 dps, ±1000 dps, and ±2000 dps
- Accelerometer with programmable FSR of ±2g, ±4g, ±8g, and ±16g
|
Applications |
- Drones and flying toys
- Motion-based gaming controllers
- Virtual reality headsets and controllers
- Indoor/outdoor navigation (dead-reckoning, floor/elevator/step detection)
|