Maxim’s MAX14870 compact, full-bridge DC motor drivers provide a small, low-power, and simple solution for driving and controlling brushed DC motors and relays.
By Maxim Integrated 120
Maxim's MAX14871 4.5 V to 36 V full-bridge DC motor driver provides a low-power and simple solution for driving and controlling brushed motors.
By Maxim Integrated 164
TRINAMIC's dual-axis stepper integrated controller driver IC family are powerful systems-on-a-chip, integrating sophisticated ramp-generators and two power stages.
By TRINAMIC Motion Control GmbH 74
MPS' MP6532 is a gate driver IC designed for three-phase brushless DC motor driver applications. It is capable of driving three half bridges consisting of six N-channel power MOSFETs up to 60
By Monolithic Power Systems 60
Diodes' AH2985 includes a Hall-effect sensor, dynamic offset correction and two complementary open-drain output drivers with internal Zener diode protection.
By Diodes Incorporated 37
STMicroelectronics' second series of small low-loss intelligent molded module (SLLIMM) provides a compact, high performance AC motor drive in a simple, rugged design.
By STMicroelectronics 97
Diodes' AH5775 is a single-chip solution for driving single-coil, brushless, direct current fans, and motors.
By Diodes Incorporated 60
Hamburg-based manufacturer TRINAMIC motion control is introducing an additional product-family, named motionCookies.
By TRINAMIC Motion Control GmbH 58
Texas Instruments' DRV10970 is a three-phase BLDC motor driver for home appliance, cooling fans, and other general-purpose motor control applications.
By Texas Instruments 57
Texas Instruments' DRV2624 ERM/LRA haptic driver relies on a proprietary closed-loop architecture to deliver haptic effects while optimizing power consumption.
By Texas Instruments 75
Texas Instruments’ DRV2625 device has an automatic go-to-standby state and a battery preservation function to reduce power consumption without user intervention.
By Texas Instruments 39
For system designers who want more efficient motor operation with variable speed and sensorless control, NXP offers H-bridge, brushed and brushless DC motor drivers required to complete system des
By NXP Semiconductors 51
Texas Instruments' DRV10964 is a three-phase, sensorless motor driver designed for high-efficiency, low-noise and low-external component count motor drive applications.
By Texas Instruments 79
Texas Instruments’ DRV8884, 1 A stepper motor driver is for industrial equipment applications that include multi-function printers and scanners.
By Texas Instruments 64
TI’s DRV8885 stepper motor driver with integrated current sense is for industrial equipment applications that include multi-function printers.
By Texas Instruments 83
Texas Instruments’ DRV8880, 2 A, stepper motor driver with AutoTune™ is for industrial applications that include automatic teller and money handling machines.
By Texas Instruments 70
Texas Instruments offers its DRV8860 8 V to 38 V, 8-channel, serial interface, low-side drivers with over-current protection and open/shorted load detection.
By Texas Instruments 77
Texas Instruments' DRV8881, dual H-bridge motor drivers are for industrial applications that include automatic teller and money handling machines.
By Texas Instruments 78
Allegro's A5988 is a quad DMOS full-bridge driver capable of driving up to two stepper motors or four DC motors.
By Allegro MicroSystems, LLC 43
TRINAMIC introduces their dedicated stepper motor servo controller IC that makes development of closed loop stepper systems easier than ever with proven reliability.
By TRINAMIC Motion Control GmbH 70