Sanken's STA7130MPR Series drivers are designed for low-voltage (up to 44 V output) motor applications.
By Sanken 58
Diodes' ZXBM5210 has four modes of operation: forward, reverse, brake and standby, selected via the device’s FWD and REV input pins.
By Diodes Incorporated 56
TRINAMIC's TMC5031 is a tiny IC with sophisticated ramp-generators and two power stages that help quicken time to market while saving money and space.
By TRINAMIC Motion Control GmbH 64
TRINAMIC's TMCM-3110 is a compact, three-axes stepper motor controller/driver module for two-phase bipolar stepper motors.
By TRINAMIC Motion Control GmbH 58
Toshiba provides low-cost brushed DC motor driver ICs as a cost-effective way to control motion in a range of products including home and office appliances.
By Toshiba Semiconductor and Storage 69
Toshiba's stepper motor driver ICs has the ability to generate more power without increasing the weight of the motor.
By Toshiba Semiconductor and Storage 98
Toshiba's four types of motor controllers and driver ICs use BiCMOS and BiCD processes to help them achieve high-power and low power consumption.
By Toshiba Semiconductor and Storage 90
TI's DRV8838 has the ability to driver a DC motor or another device such as solenoids in battery-powered motion control applications.
By Texas Instruments 131
TI's DRV8307 and DRV8307 controller from and three-phase BLDC motor pre-drivers have integrated speed control and communication logic.
By Texas Instruments 71
TRINAMIC's TMCM-1043 kit is pre-configured and pre-programed and is designed to be used with MCM-1043 stepper motor driver.
By TRINAMIC Motion Control GmbH 103
DRV10866 3-phase sensorless motor drivers have low noise, reduce external component count, and protect against over current.
By Texas Instruments 61
Texas Instruments' DRV8846 provides a highly-integrated stepper motor driver for cameras, printers, projectors, and other automated equipment applications.
By Texas Instruments 106
Texas Instruments' DRV10983 is a three-phase sensorless motor driver with integrated power MOSFETs, which can provide continuous drive current up to 2 A.
By Texas Instruments 200
A high performance OTP memory-based motion control ASIC designed to implement high performance control solutions for advanced inverterized appliance motor control
By Infineon Technologies 61
The ARM® Cortex®-M4 MCU family microcontrollers is a high-performance solution from NXP
By NXP Semiconductors 115
Allegro's A4963 three-phase sensorless BLDC MOSFET gate driver is scalable for a wide range of motor currents and applications.
By Allegro MicroSystems, LLC 70
Diodes' DMHC3025LSD and DMHC4035LSD are designed for space limited single-phase brush and brushless motor driving and inductive wireless charging circuits.
By Diodes Incorporated 48
Diodes Incorporated's 74HC164 74HCT164 74AHC164 and 74AHCT164 serial shift registers can be used to expand the output capabilities of a simple-microcontroller.
By Diodes Incorporated 26
Texas Instruments’ DRV8846 and DRV8848 provide a dual H-bridge motor driver for cameras, printers, home appliances, and other mechatronic applications.
By Texas Instruments 92
TRINAMIC introduces the TMC21x0 family with extremely silent stepper motor driver, including: stallGuard2, coolStep and dcStep, and one additional SPI interface.
By TRINAMIC Motion Control GmbH 85