TLV9001 1-Channel Op-Amp

By Texas Instruments 166

TLV9001 1-Channel Op-Amp

Texas Instruments' TLV9001 single-channel, low-voltage (1.8 V to 5.5 V) op-amps feature rail-to-rail input and output swing capabilities. The op-amps provide a cost-effective solution for space-constrained applications such as smoke detectors, wearable electronics, and small appliances where low-voltage operation and high capacitive-load drive are required. The capacitive-load drive of the TLV9001 is 500 pF, and the resistive open-loop output impedance makes stabilization easier with higher capacitive loads. The op-amps are designed for low-voltage operation (1.8 V to 5.5 V) with performance specifications similar to the TLV600x devices.

The robust design of the TLV9001 simplifies circuit design. The op-amp device features unity-gain stability, an integrated RFI and EMI rejection filter, and no-phase reversal in overdrive conditions. The TLV9001 includes a shutdown mode (TLV9001S) that allows the amp to switch off into standby mode with typical current consumption less than 1 µA.

The op-amps are available in micro-size and industry-standard packages such as SOT-553, SOT-23, and TSSOP.

  • Scalable CMOS amp
  • Rail-to-rail input and output
  • Low input offset voltage: ±0.4 mV
  • Unity-gain bandwidth: 1 MHz
  • Low broadband noise: 27 nV/√Hz
  • Low input bias current: 5 pA
  • Low quiescent current: 60 µA/Ch.
  • Unity-gain stable
  • Internal RFI and EMI filter
  • Operational at supply voltages as low as 1.8 V
  • Easier to stabilize with higher capacitive loads due to resistive open-loop output impedance
  • Extended temperature range: -40°C to +125°C
  • Smoke detectors
  • Motion detectors
  • Wearable devices
  • Large and small appliances
  • EPOS
  • Barcode scanners
  • Sensor signal conditioning
  • Power modules
  • Personal electronics
  • Active filters
  • HVAC systems: heating, ventilating, and air conditioning
  • Motor controls: AC induction
  • Low-side current-sensing