DG11/DG12 Series IEC Inlet with Circuit Breaker

By SCHURTER Inc. 216

DG11/DG12 Series IEC Inlet with Circuit Breaker

SCHURTER's extremely compact DG12 and DG11 series power entry modules combine an IEC appliance inlet with an integrated rocker style circuit breaker. The DG12 also includes a mains filter. The modules feature a first-of-its-kind IP67 sealed version according to IEC 60529 in addition to IP40 options.

The power entry modules feature three mounting variations: front panel snap-in, 1 mm to 3 mm; and front or rear panel screw-mount with top or side affixed frame. The sealed version is front panel mounted. It has a sealing gasket between the flange and panel, which is tightly mounted with sealed screws. The circuit breaker has a factory mounted protective cover. The inlet is sealed around the frame, as well as around the pins. The inlet is not sealed when plugged, although an IP54 version of the inlet is planned.

The DG12 and DG11 incorporate SCHURTER's TA35 circuit breaker for equipment, available with current ratings from 0.5 A to 15 A. The CBE provides the function of a 2-pole ON/OFF switch with 1- or 2-pole overcurrent protection. The rocker switch is recessed to prevent against inadvertent actuation. It is available illuminated or non-illuminated in a variety of colors and markings.

The DG12 features a standard and low leakage mains filter, as well as standard and higher inductive performance options. In addition, the filter series is available in standard or medical versions for protection class I and II.

The PEMs are V-Lock cordset compatible, designed to protect against unintended disconnection.

DG11 Series Features
  • Variant tested for IP67 into the appliance
  • Various mounting options
  • Recessed rocker prevents accidental manipulation
  • Compatible with V-Lock cord retention
  • Connector and circuit breaker are pre-wired
  • Circuit breaker non-illuminated or illuminated
  • Suitable for use in equipment according to IEC/UL 60950
DG12 Series Features
  • IP67 protection
  • Recessed rocker switch
  • Various mounting options
  • V-Lock cord retaining
  • All single elements are already wired
  • Circuit breaker non-illuminated or illuminated
  • Suitable for use in equipment according to IEC/UL 60950
  • Suitable for use in medical equipment according to IEC/UL 60601-1
  • Industrial appliances
  • Motor drive appliances
  • Appliances exposed to water or dust
  • Sterile medical and laboratory appliances
  • Commercial cooking appliances
  • Power tools