OPA202 Precision Op-Amp

By Texas Instruments 109

OPA202 Precision Op-Amp

Texas Instruments' OPA202 device is built on the industry-leading precision super-β complementary bipolar semiconductor process and offers ultra-low flicker noise, low offset voltage, low offset voltage temperature drift, and excellent linearity with common-mode and power-supply variation. The device offers an exceptional combination of DC precision, heavy capacitive load drive, and protection against external EMI, thermal, and short-circuit events.

The op-amp offers a supply current of 580 µA at ±18 V. The OPA202 device does not exhibit phase inversion and it is stable with high capacitive loads. The OPA202 is fully specified with a temperature range from -40°C to +105°C.

  • Precision super-β performance:
    • Low offset voltage: 200 µV (max.)
    • Ultra-low drift: 1 µV/°C (max.)
  • Excellent efficiency:
    • Quiescent current: 580 µA (typ.)
    • GBWP: 1 MHz
    • Low input voltage noise: 9 nV/√Hz
  • Low bias current: 2 nA (max.)
  • Low 0.1 Hz to 10 Hz noise: 0.2 µVPP
  • Wide supply voltage: ±2.25 V to ±18 V
  • Replaces OP-07 and OP-27
  • Stable performance:
    • High CMRR and AOL: 126 dB (min.)
    • High PSRR: 126 dB (min.)
  • Ease-of-use and design simplicity:
    • Heavy capacitive load drive: 5 µs settling time with 25 nF
    • Ultra-high input impedance: 3,000 GΩ and 0.5 pF
    • EMI hardened, thermal, and short-circuit protection
  • Sensor excitation
  • Coaxial, power planes, and ground drivers
  • Test and measurement equipment
  • Transducer applications
  • Temperature measurements
  • Precision active filters
  • Battery-powered instruments