Texas Instruments' TPS25741/TPS25741A implements a source compliant to USB power delivery 2.0 and USB Type-C Revision 1.2. It can be used in either a power mux or DC-DC implementation.

The device monitors the CC pin to detect a USB Type-C sink attachment, then enables the GDNG and G5V gate drivers to apply 5 V to V_BUS. It then offers up to three voltages using USB power delivery. In order to source the second voltage the G5V gate driver is disabled and the GDPG gate driver is enabled. In power mux implementations, all gate drivers are used and the CTL pins are not necessary. In DC-DC implementations only the GDNG gate driver is necessary and the CTL pins program the power supply for the required voltage. The device automatically discharges V_BUS per USB Power Delivery requirements. The PSEL, HIPWR, PCTRL, and EN9V/EN12V pins are used to configure the voltages and currents advertised.

The device typically draws 5.4 µA (8 µA if V_DD = 0 V) when no device is attached. The port attachment indicator (UFP or DV_DD) outputs may be used to disable the power source until a sink is attached for more system power savings

Protection features include over-voltage, over-current, over-temperature, IEC for CC pins, and system override of gate drivers (GD).